These came from Standens Mike.
I was there yesterday and asked for 5/16" x 2" UHL and some new guy came back saying he only had 1.500" UHL in a 5/16" which is what I already had. As he knew this wasn't what I asked for, he just gave me the 3/8" x 2" bolts in case I could make them work. (Larry & Steve were both busy when I was there).
After seeing how much of a PITA this was going to be to drill the springs for the larger diameter bolt, I called Travis up earlier today and explained that I needed 1/2" Fillister Head center bolts in a 5/16" size but that I needed something longer than 1.50" UHL. He totally
got it and asked me to drop back in as he found some 4" long bolts with the correct 1/2" Fillister head that I could cut down. He also gave me some hardened 3/8" washers and spacers along with some double nuts for the bottom but won't need the spacers or washers as they are too big.
I also checked Bolt Supply looking for a deeper barrel nut but there wasn't anything in fine thread so I'll try this stuff out tonight and see how it all fits together. I should be able to McGuiver something. (lol)