View Single Post
  #53  
Old 01-01-2017, 10:49 PM
RPOLS3's Avatar
RPOLS3 RPOLS3 is offline
Yenko Contributing Member
 
Join Date: May 2009
Location: Rockford, IL area
Posts: 3,133
Thanks: 4,321
Thanked 1,768 Times in 747 Posts
Default Re: Passing the reins to our Grandson


So - for those that did not know - Jacob won the Titan lift they were giving away to a youngster at the MCACN show this year (Thanks Bob Ashton for the heads up on our way out Saturday evening). Since we drove the car there we had no way to get the disassembled lift home with us. The ceilings in our garage are a bit too low to use the lift so on the ride home from the show Jacob decided that we should install it at Grandpa Jake's house. Grandpa Jake also happened to have a neighbor with a box truck large enough to fit the parts and pieces of the lift in - and by 11 AM Monday morning everything was back in Dad's garage waiting to be assembled. We arranged for the garage door tracks to be changed and a new operator installed to clear the lift and since we all had some time off for the holidays we met there last week and put it all together.

Dad had everything laid out when we got there - doing some strategizing on our game plan



A "before" picture



In about 45 minutes we were able to get the framework completed





Measuring to make sure the cables are all adjusted properly



The 409 will reside here most of the time - maybe we can park the Turbo Regal underneath next winter.





Done except the installation of the concrete anchors - we wanted to verify we had all the clearances we needed on all 4 sides before we anchored it down.



It took about 4 hours for the 4 of use to assemble the lift - none of us had ever done one before.

Thank you Titan and MCACN!
__________________
Jake Dykstra

Dykstra Motorsports
Reply With Quote
The Following User Says Thank You to RPOLS3 For This Useful Post:
dykstra (12-05-2023)