Quote:
Originally Posted by jasonL78
For now you may be able to put a body shim behind the hood hinge to push it to the pass side if you have room.
|
That worked! I put a 1/16th shim between the hinge and fender on both driver's side hinge bolts. The hood now clears the fender now when you open it. I took the old girl out for a run today since it was sunny and 55 degrees. Started right up. Boy this motor can run! And the wide open throttle noise coming out of the shaker is soooooo much louder than the old Formula hood setup.
I just spent an hour getting the solenoids and brackets hooked up inside the shaker. Next thing is to do is get the wiring plugged in and the Turbo 400 kickdown switch installed on the gas pedal bracket under the dash. (the 1971/72 setup employed the Turbo 400 kickdown switch as the on/off power supply to the shaker solenoid. Very ingenious of the engineers to have thought of that. It works much better than the carb-mounted switches, plungers and solenoids used on the 1970. :-)