I wound up ordering a custom ground Bullit cam -
can't wait to install it - I have a set of roller tip comp 1.52 rockers, heads already have screw in studs and guide plates - and I will be installing stiffer springs to compensate -
the cam is thus!
CHS 278/282-F12+5
Duration @ .050 = 248/252
Lift with 1.5 rocker = .530/.540
Valve lash (hot) = .016/.016
Lobe separation = 112
Intake centerline = 107
so kinda like a tight lobe LT1 with much more aggressive ramps.
I'll be running a set of 1 3/4 Kustom clone Z28 Headers -
I ordered a Flowmaster American Thunder exhaust setup = but I won't be running he Super 44 mufflers, but rather (either) the Dynomax Ultraflow SS or a Set of Borla XR-1 mufflers -
I like this system because the tail pipes (while larger at 2.5") exit in the stock location with a 45" cut like the original tailpipes.
keeping the m20, and 3.73s
Also will be installing a set of BFGoodrich or Coker WideOval Radials on a set of vintage Minilite wheels -
CAN NOT WAIT!!!
|