Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|
|
#1
01-27-2015, 01:18 PM
|
||||
|
||||
Z28 firewall I.D.
Is there anything in this arrangement of holes (speedo cable?) and protrusion of emergency brake cable that identifies this car as a '69 Z28?
|
|
#3
01-27-2015, 03:52 PM
|
|||
|
|||
|
Re: Z28 firewall I.D.
No hole for ZL2.
__________________
"Knowledge is good" Emil Fabor 67 L/78 Camaro SS/RS H-H,1W,2LGSR,3SL,4K,5BY. (Sold) 70 L/78 Nova M-21,Black Cherry,Sandalwood Int. 09 Pontiac G8 GT Premium,Sport,Roof. Liquid Red.
|
|
#4
01-27-2015, 04:19 PM
|
|||
|
|||
|
Re: Z28 firewall I.D.
did the flat hood cars have the ZL2 hole on the fire? If he pulled the back seat wouldn't the "X" designation be on the rear seat frame?
|
|
#5
01-27-2015, 07:13 PM
|
||||
|
||||
|
Re: Z28 firewall I.D.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: robber6910</div><div class="ubbcode-body">did the flat hood cars have the ZL2 hole on the fire? If he pulled the back seat wouldn't the "X" designation be on the rear seat frame? </div></div>
Los Angeles car, no X-codes.
__________________
I ain't nobody, dork.
|
|
#6
01-27-2015, 08:38 PM
|
||||
|
||||
|
Re: Z28 firewall I.D.
I thought there was something in the positioning of the gas pedal exit in relation to the steering column holes. But I figured out thanks to CRG - you can I.D. a Muncie car, but not specifically a Z.
 CAR OF INTEREST: 
|
|
#7
01-28-2015, 12:14 AM
|
|||
|
|||
|
Re: Z28 firewall I.D.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: robber6910</div><div class="ubbcode-body">did the flat hood cars have the ZL2 hole on the fire? If he pulled the back seat wouldn't the "X" designation be on the rear seat frame? </div></div>
No hole for flat hood Z's.
__________________
"Knowledge is good" Emil Fabor 67 L/78 Camaro SS/RS H-H,1W,2LGSR,3SL,4K,5BY. (Sold) 70 L/78 Nova M-21,Black Cherry,Sandalwood Int. 09 Pontiac G8 GT Premium,Sport,Roof. Liquid Red.
|
|
#8
01-27-2015, 11:53 PM
|
|||
|
|||
|
Re: Z28 firewall I.D.
engine mount #s Z/s and SS350?? use same engine stand but not other SBCS also check length if pitman arm the Z's got fast ratio should be 5.8" long for fast ratio
from David Pozzis site: POWER LONG 5.8", 3953237 POWER SHORT 5.25", 3935711
__________________
69 RS/Z 302 VE3 Daytona 69 Chevelle SS 396 375 69 T/A clone LS6/6 speed 90 Formula 350
|
|
#9
01-30-2015, 08:32 PM
|
||||
|
||||
|
Re: Z28 firewall I.D.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Zman1969</div><div class="ubbcode-body">engine mount #s Z/s and SS350?? use same engine stand but not other SBCS also check length if pitman arm the Z's got fast ratio should be 5.8" long for fast ratio
from David Pozzis site: POWER LONG 5.8", 3953237 POWER SHORT 5.25", 3935711 </div></div> In 1969 both the Z/28 & the SS350 shared the same engine frame mounts...left side #3945507 right side #3945508. Original stampings should be on them unless they were changed at some point. Sal
__________________
I currently own a 1969 Camaro SS350. Although the original drivetrain is long gone, this 4/speed car has a March '69 HC coded block with #041 heads. The transmission is an M20 Muncie #660 case and the rearend is a BS coded 12 bolt posi. Built in Van Nuys.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
