![]() Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I started digging around in my 69 Chevelle yesterday and located another partial buildsheet in the back of one of the front bucket seats.
![]() That makes 3 partial sheets found, but none with the car's VIN on it. Would've been nice to get one with a partial VIN at least. All of the sheets I've found are the same part of the buildsheet - 2 of the lower left corner and 1 of the whole left 1/3 of the sheet. Is there any ryhme or reason to this? Car was built at Framingham, MA. Blair
__________________
1968 L71 Corvette Coupe 1967 L30 Chevelle Malibu 1968 L79 Corvette Convertible (son's) |
#2
|
||||
|
||||
![]()
Blair,
My 69 L78 Framingham (05D) SS 'velle has same issue two. Below is a link to my two partials: ![]() http://community.webshots.com/photo/...65023956uTBCXb Sam
__________________
Sam... ![]() |
#3
|
|||
|
|||
![]()
Mine is an 04D and your sheets (pieces) look identical to mine. It almost appears that the sheets were torn or cut off?
![]() Very strange. Blair
__________________
1968 L71 Corvette Coupe 1967 L30 Chevelle Malibu 1968 L79 Corvette Convertible (son's) |
#4
|
|||
|
|||
![]()
This is the one found in our -71 Le Mans. Also cut off.
Anders
__________________
Anders Stålklint. After selling my COPO 9561 I´m now a "postman" with the main project being a 1966 327 2 dr sedan Chevy II. ![]() |
#5
|
||||
|
||||
![]()
Anders
What plant was that Pontiac built at? That one looks to be a professional cut with a razor tool.Most likely when the trim shop was assembling the seat material,they inadvertently cut the buildsheet in the process. I recall some Chevelle owners finding the exact samething on their cars. |
#6
|
||||
|
||||
![]()
Can you post a picture of your BSs?
|
#7
|
|||
|
|||
![]()
Rick,
At the "G" plant. I´m sure you know where that is. Anders
__________________
Anders Stålklint. After selling my COPO 9561 I´m now a "postman" with the main project being a 1966 327 2 dr sedan Chevy II. ![]() |
#8
|
||||
|
||||
![]()
Interesting..I know of six 1969 Chevelles built at Framingham Mass.(G) Plant that have their Buildsheets cut in nearly the same identical fashion.
They stopped Chevelle production after the 1969 model year. |
#9
|
|||
|
|||
![]()
I'll try to post my sheet here. If I don't have any luck I may need some help.
Blair
__________________
1968 L71 Corvette Coupe 1967 L30 Chevelle Malibu 1968 L79 Corvette Convertible (son's) |
![]() |
|
|