DYNO - 06 Vette TT, 02 SS 427 LSX Turbo

[firstgenaddict]

My brother asks if I want to go watch some dyno pulls with the rebuilt engine in his friends 2002 SS Camaro.

We get there and they are putting a 2006 Vette with a Hawk TT kit. Alcohol and water injected as well.

http://youtu.be/720QxqI821g

Then the Camaro

[firstgenaddict]

Take in mind this is a STREET CAR!!!!

ON with the PULLS!!!!!

1407 HP @ 6300 RPM

http://youtu.be/J0UaoBE4E2w

1414 HP @ 6500 RPM

http://youtu.be/9URrM6wFP8A

If anyone can embed, I'd appreciate it.

ENJOY!!!

[Xplantdad]

<object width="425" height="350"> <param name="movie" value="https://www.youtube.com/v/J0UaoBE4E2w"></param> <param name="wmode" value="transparent"></param> <embed src="https://www.youtube.com/v/J0UaoBE4E2w" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> </embed></object>





<object width="425" height="350"> <param name="movie" value="https://www.youtube.com/v/9URrM6wFP8A"></param> <param name="wmode" value="transparent"></param> <embed src="https://www.youtube.com/v/9URrM6wFP8A" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"> </embed></object>

[markjohnson]

That's insane. It looks like they just swapped the stock OEM exhaust manifolds backwards for plumbing the turbo.

[firstgenaddict]

It was all fab'd by the owner, this was his daily driver and did a little then it got wilder and wilder. Previous top HP# was 1112HP, changed the turbo to a larger exhaust, and rebuilt the engine(had 150 passes on it) and the first pull was 1370 on 18#boost. Then 1407, then 1414 on 23#.

Bruce - The owner, tuner/engine/car builder, is moving to Arizona after the first of the year.

[Xplantdad]

Wow! Maybe it'll be at Pavillions James [img]<<GRAEMLIN_URL>>/smile.gif[/img]

[bbbenny]

It got my attention! Congrads on a great setup!WOW. The Dutchman [img]<<GRAEMLIN_URL>>/worship.gif[/img]

[jimbo]

What was the guy holding onto in the engine compartment?
Wouldn't want my face that close to the action.

[firstgenaddict]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jimbo</div><div class="ubbcode-body">What was the guy holding onto in the engine compartment?
Wouldn't want my face that close to the action. </div></div>

Brian the owner of the shop, JAP automotive, (811 hp 4 cyl Nissan 240 5 sec 1/8's) holding the optical pickup for the dyno. When the car jumped it came off in mid pull.

This is the highest HP by far the dyno has seen, the blow through on the carb keeps an awesome 10.8 a/f mixture the whole pull. Chris (Camaro owner) is great on the calibration of the fuel curves and tricking the injectors into lowering the a/f ratio and then tweaking it through the RPM range, if they lean out you can hang it up...

ALL I KNOW IS THERE is a chassis dyno less than 2 miles from me door to door!!!

[73RSLTZ]

i can tell you its one hell of a ride from a 40mph Roll.