Holley 3310-3 question

[HawkX66]

I have a Holley 3310-3 (4160) that was converted with a second metering block a long time ago. The accelerator pump and mixture screws are factory blocked off on the secondary metering block. So now it is a dual feed, single pumper with the block instead of a metering plate. It ran well eight years ago, but since it's been sitting I wanted to throw a gasket kit etc at it before I put it on my motor.
My question is, I bought a Quick Fuel 3-200 for a 3310. Do I just need a set of gaskets for the second metering block or should I have bought the kit for a 4150? I shot a message to Quick Fuel, but I'm sure they're gone until Tuesday.

[earntaz]

It would seem to me all you need is a secondary metering block gasket set -- fuel bowl to m/block and m/block to main body. Does the secondary metering block have a power valve? If so, take that into consideration. TAZ

[HawkX66]

Thanks Craig. I thought the same thing about the gaskets so I ripped open the Quick Fuel kit that I already had. It ends up that it has all the gaskets I need even though I have the metering block vs plate. My secondaries do have a power valve, so I'll need to pick up one before I put it back together. She can soak in the mean time...

[Spooky]

My wife would never let me do that in the house, And she's a car girl!

Scott

[HawkX66]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Spooky</div><div class="ubbcode-body">My wife would never let me do that in the house, And she's a car girl!

Scott </div></div>
Ha. Wife wasn't home. [img]<<GRAEMLIN_URL>>/whistle.gif[/img] It hasn't had gas in it in 8 years, so there was no smell thankfully. I ended up picking up a #65 power valve locally and got it back together with no drama. All is good.

[earntaz]

So I read ya' got it back together before the Pentagon got home? Don't let the lady see this topic or you'll let the cat is out of the bag ... LOL TAZ

[HawkX66]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: earntaz</div><div class="ubbcode-body">So I read ya' got it back together before the Pentagon got home? Don't let the lady see this topic or you'll let the cat is out of the bag ... LOL TAZ </div></div>
Yessah. I figured I'd really be pushing it with my M21 rebuild [img]<<GRAEMLIN_URL>>/smile.gif[/img]

[earntaz]

OMG -- you'll never get that smell out of the living room ... TAZ

[HawkX66]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: earntaz</div><div class="ubbcode-body">OMG -- you'll never get that smell out of the living room ... TAZ </div></div>
Eh, what's a little gear oil smell? [img]<<GRAEMLIN_URL>>/wink.gif[/img] Yep, that one stays in the garage lol