|
#1
|
||||
|
||||
Chevelle updates
Decided to do a little updating, correcting, and cleaning up of my Chevelle this late winter/spring.
I've had this car since 1987 - my first car. I have the original born with 402/240 engine on a stand in the corner of the garage and back in 2000-ish installed a GMPP 454/425 crate motor and made it appear like the original 402 as much as I could. Things were looking a bit tired under the hood and I wanted to go through the brakes and install some of the original parts back on the car. I started disassembly back in February. Last edited by RPOLS3; 05-03-2021 at 05:47 PM. |
The Following 5 Users Say Thank You to RPOLS3 For This Useful Post: | ||
Damien (05-03-2021), dykstra (05-05-2021), kwhizz (05-25-2021), PeteLeathersac (05-03-2021), SS427 (05-03-2021) |
#2
|
||||
|
||||
This whole project started out as a carb replacement. I had installed a generic speed shop Holley on the crate motor and wanted something more correct, so I called Eric and he sent me a fresh real 4492. I couldn't bolt this piece of jewelry on my existing setup without some clean up and re-freshing of the other major components.
|
The Following 5 Users Say Thank You to RPOLS3 For This Useful Post: | ||
1972convss454 (05-03-2021), big gear head (05-03-2021), dykstra (05-05-2021), kwhizz (05-04-2021), Xplantdad (05-03-2021) |
#3
|
||||
|
||||
Did some paint touch up and re-plated the heater hose fittings and clamps - still the dated originals.
|
The Following 4 Users Say Thank You to RPOLS3 For This Useful Post: | ||
#4
|
||||
|
||||
I sent out the master cylinder and calipers to NAPA to be rebuilt, had the original brake dust shields galvanized, and had a local plater re-do the gold on the caliper mounting brackets (and smog check valves). I sent the booster and master cylinder cover to Mike Gibbons. Re-detailed some of the other components I had to remove as well.
|
The Following 7 Users Say Thank You to RPOLS3 For This Useful Post: | ||
1972convss454 (05-03-2021), big gear head (05-03-2021), dykstra (05-05-2021), kwhizz (02-22-2022), olredalert (05-17-2021), ORIGLS6 (05-24-2021), Xplantdad (05-03-2021) |
#5
|
||||
|
||||
Decided to upgrade the wheel and tire package while I was at it too. I haven't got it back on the ground yet to drive though.
|
The Following 8 Users Say Thank You to RPOLS3 For This Useful Post: | ||
1972convss454 (05-03-2021), dykstra (05-05-2021), GearheadSS (10-05-2021), kwhizz (05-04-2021), olredalert (05-17-2021), ORIGLS6 (05-24-2021), PeteLeathersac (05-03-2021), Xplantdad (05-03-2021) |
#6
|
||||
|
||||
Tiger Paws...
Quote:
Based on my homework they should perform well [Uniroyal is part of Michelin]. The Eric restored 4492 is the bomb....he is the best there is. -wilma
__________________
02 Berger 380hp #95 Lots of L78 Novas Join National Nostalgic Nova! 70 Orange Cooler 69 Camaro |
#7
|
|||
|
|||
Quote:
Nice choice! I just ordered a set of American Racing wheels from 4wheelonline last week. Last edited by jandron; 05-17-2021 at 03:26 AM. |
#8
|
||||
|
||||
Thank you. I was able to get these from my local speed shop guy, surprised how reasonably priced they were.
|
The Following User Says Thank You to RPOLS3 For This Useful Post: | ||
jandron (05-24-2021) |
#9
|
||||
|
||||
Worked with Bill Hodel to get a correctly dated and restored smog pump and peripherals. More jewelry.
|
The Following 4 Users Say Thank You to RPOLS3 For This Useful Post: | ||
#10
|
||||
|
||||
Sent my original alternator out to Ken Bruno and had him work his magic on it.
|
The Following 6 Users Say Thank You to RPOLS3 For This Useful Post: | ||
1972convss454 (05-03-2021), dykstra (05-05-2021), kwhizz (02-22-2022), olredalert (05-17-2021), ORIGLS6 (05-24-2021), Xplantdad (05-03-2021) |
|
|