Dedicated to the Promotion and Preservation of American Muscle Cars, Dealer built Supercars and COPO cars. |
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
|
|
Thread Tools | Display Modes |
|
|
|
#1
03-11-2007, 08:27 PM
|
|||
|
|||
Rear axle tube stamping
I re-checked the stamping on the passenger side tube of the rear axle on my 1969 Chevelle hoping to find "KQ". I had originally found the stamping 0821K. Unfortunately, on rechecking the number (using a scotch brite and a little brake fluid) the stamping is 0821K--there is not another letter after the K. Anyone have any idea how this could be? Could it possibly be a factory replacement rearend? The passenger side tube has the VIN stamped on it and it looks like the driver side tube may also have the VIN stamped on it. Any ideas?
Thanks. Mike 
|
|
#2
03-11-2007, 09:15 PM
|
||||
|
||||
|
Re: Rear axle tube stamping
Is there an E on the tube anywhere? to the left or under the stamping?
__________________
~JAG~ NCRS#65120 68 GTO HO 4 spd Alpine Blue /Parchment 2 owner car #21783 71 Corvette LT1 45k miles Orig paint - Brandshatch Green - National Top Flight - last known 71 LT1 built. 71 Corvette LT1 42k miles Original paint - Black - black leather - only black LT1 known to exist. NUMEROUS Lemans blue Camaros, Monza Red and Daytona Yellow Corvettes & a Chevelle or two... Survivors, restored cars, & other photos https://picasaweb.google.com/lh/myphotos
|
|
#3
03-11-2007, 09:39 PM
|
|||
|
|||
|
Re: Rear axle tube stamping
[ QUOTE ]
The passenger side tube has the VIN stamped on it and it looks like the driver side tube may also have the VIN stamped on it. Any ideas? Thanks. Mike [/ QUOTE ] Engines and transmissions are the only drivetrain components that are VIN-stamped to match the car. 
__________________
1969 Chevelle SS396 L78 M22 4:10 Tuxedo Black 1970 LS3 Malibu 400 BB convertible 1970 LS3 Malibu 400 BB coupe 1970 Chevelle 300 series LS3 400 BB coupe, special order Monaco Orange 1970 Chevelle Concours Estate LS3 400 BB wagon 1970 Chevelle SS396 L78 M21 3:55 Tuxedo Black
|
|
#4
03-11-2007, 09:50 PM
|
||||
|
||||
|
Re: Rear axle tube stamping
That looks like it would decipher as August 21st.
The K would stand for the plant code which is McKinnon. Look for a two letter prefix before that assembly date you just listed,like KK or KF. CRG Reference topic Look for the rearend casting date at the 4 O'clock webbing position while staring straight at the bullnose cover. I agree,I've never seen a CON VIN stamped into a rearend axle tube before.
|
|
#5
03-11-2007, 10:13 PM
|
||||
|
||||
|
Re: Rear axle tube stamping
For reference here is an example for you of the axle in one of my cars.. The "G" in my application being the Detroit Gear plant..I have also never heard of a VIN stamp on a rear end. I would have to believe a previous owner had that done for ID purposes
  
|
|
|
|
Hybrid Mode
