396/375 hp crane cam solid camshaft

[JLerum]

Chris,

http://store.summitracing.com/partde...p;autoview=sku It's the one you want.!!!!!

Jim

[Chevy454]

Jim: look at the top of the page:

Estimated Ship Date: 12/22/08

I found one in a wharehouse in Tennessee from some other parts place...haven't heard back from Chris to see if he picked it up?

[JRSully]

That is probably one of Chevy's finest, well thought out camshafts, hence the wait to get one. Crane even uses the 143 Grind #

[1968 nova ss]

rob,I called the # you gave me and the camshaft is on the way.thanks,buddy.chris Teed

[Keith Tedford]

Between the L72 and L78 cars that I have had, I have driven a lot of miles with never a cam related problem. With headers and tuning an L72 Chevelle can run well into the 12s and do it for a long, long time. It is docile enough to drive in stop and go city driving or you can wail down the strip. About all you need is better valve springs, especially if you are going over 6K rpm.

[Mr70]

That's why the factory introduced a more durable valve spring beginning with the introduction of the 1970 solid lifter engines.
Warranty work increased do to too many dropped valves on the previous 69 releases.

[Chris_69_SS]

for springs I would say Crane 99893s are THE best all around spring. I have used these on everything from .520 lift hyd cams to the .622 ultradyne solid I run now....last forever

[JLerum]

Crane Camshafts doors are closed right now. Unless the banks give them a second chance, you better find an alternative for a reproduction camshaft. The 969961 is gone unless you can find one hidden on a shelf from somewhere.

Jim