Best preservation product

[enio45]

good stuff!! good results 18 months later that i have experienced

[whitetop]

Fluid Film works great..been using it for years.

[69z28302]

Let's see, so if I use Safest Rust Remover and top coat it with one of the products mentioned it should last quite awhile.

Thx
Mike

[P.J.]

Where can you buy RPM
PJ

[Billohio]

http://www.ecsautomotive.com/rpm.php?rpmlnk=main

[stritestoration]

I've been buying evaporust now from harbor freight by the gallon. wish I knew about it years ago. Put nuts/bolts or a hood latch, spring whatever overnight and by the next day the rust is gone and your hardware has its original finish back. I've been amazed at how an orange under the hood bolt comes out looking like it was replated with the black parkerized finish. It will save a ton of time, blasting and sending out to be replated. of courst if there is severe damage or pitting it will show. But on a nice southern car every nut and bolt will look perfect. spray some wd-40 or the protectants talk about to preserve and you'll be set.

[earntaz]

X2

[Canuck]

Evaporust is available in 5 gallon pails as well, been having a field day since Christmas cleaning up parts that I might oterwise have thrown out. Clened up my driveshaft by putting it in 4 inch PVC pipe capped at one end , took only about 2 gallons of Evaporust to do the job.
For my latest restoration I am committed to either using NOS or reconditioned original parts.

Paul

[stritestoration]

^ good call on the pvc, may try that on a shaft.

[Ryan1969Chevelle]

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Canuck</div><div class="ubbcode-body">Evaporust is available in 5 gallon pails as well, been having a field day since Christmas cleaning up parts that I might oterwise have thrown out. Clened up my driveshaft by putting it in 4 inch PVC pipe capped at one end , took only about 2 gallons of Evaporust to do the job.
For my latest restoration I am committed to either using NOS or reconditioned original parts.

Paul </div></div>

Hi Paul

Evaporust works on Canadian Oldsmobile rust?

Can you post a before and after picture?

Ryan