LS6 Low Rise Intake - Page 2

Keith Tedford · #11 05-01-2014, 11:53 PM

Thanks Tony, I'll keep that in mind.

**SuperNovaSS** · #12 05-02-2014, 02:54 AM

There is no need to drill out the rivets(sp?). A thin flat head or putty knife and a small hammer will do the job. Work the blade under the rivet and twist the handle. They will back right out. You can rotate them and reinstall with locktite or JB Weld if you are anal retentive. New rivits may not be a bad idea but I'm not sure it is makes a difference.

Jason

Schonyenko2 · #13 05-02-2014, 02:06 PM

I was thinking that intake was also used for 70 L78 applications.

**69 Post Sedan** · #14 05-02-2014, 02:40 PM

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Schonyenko2</div><div class="ubbcode-body">I was thinking that intake was also used for 70 L78 applications. </div></div>

Correct Ken, that intake was used for both L78 and LS6.

Kurt