Vacuum advance can

[Gonzo1717]

Looking for a new/nos “B28” vacuum advance can. These were listed under several different part numbers, most commonly known is the VC1810.

Pic for reference.

Thanks!

[napa68]

If you are looking for a correct specification can, use this......

https://www.corvettecentral.com/c2-6...5%26count%3d17

[Gonzo1717]

This can is fully deployed at 8hg like the B28?

[napa68]

Originally Posted by Gonzo1717

This can is fully deployed at 8hg like the B28?

Yes, I had checked it before installing. I'll add to that, I checked on the part number located on the box (as CC is buying it from someone else) and it was available from Rock Auto. I ordered a couple more just to have as I tend to work on these cars. Those did NOT deploy at 8". Just the one from CC

Tim

[Gonzo1717]

Tim, thank you for the info. I went ahead and ordered one. I ordered a WVE 4V1053 from RockAuto, which they lost as a replacement for a B28 and it does not fully deploy until 13hg.

What part number did you purchase from RockAuto?

[napa68]

Originally Posted by Gonzo1717

Tim, thank you for the info. I went ahead and ordered one. I ordered a WVE 4V1053 from RockAuto, which they lost as a replacement for a B28 and it does not fully deploy until 13hg.

What part number did you purchase from RockAuto?

Cannot remember.....

[Zman1969]

I have a B28 still in box I grabbed before they became extinct if your still looking

[BCreekDave]

Here's a couple good reads on the Vac can subject with cross references if you were not aware:

https://www.crankshaftcoalition.com/...ance_Specs.pdf

https://www.corvetteforum.com/forums...post1590683061

[Gonzo1717]

PM sent

[169indy]

[email protected]

Tech Data on 4V1053 avail via Rockauto