|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
deuce LT1 valve cover restoration
hi
need help please with the correct way to restore my deuce LT1 valve covers fro cleaning / striping/ and what finish to put on them? thank you chris
__________________
1970 citrus Yenko Nova |
#2
|
||||
|
||||
The factory finish was a 'dull lustre', while the NOS ones from GM are much shinier - if that's a word. I've learned that if you glass bead them they will lose all lustre. Some guys have had them tumbled in various media with mixed results - likely walnut shells or plastic media is best. Finally, Jerry McNeish offers a 're-skinning' service that has been well received. The rest of us simply buy the best original condition ones we can find and rub them out by hand....
__________________
Marlin 70 Yenko Nova-350/360, 4speed M21, 4.10 Posi (Daddy's Ride) 69 SS Nova-396/375hp, 4speed M20, 3.55 Posi (Benjamin's Ride) 67 RS Camaro-327/250hp, 2speed Glide, & 3.08 Open (Danny's Ride) |
The Following User Says Thank You to YENKO DEUCE REGISTRY For This Useful Post: | ||
madden (11-19-2018) |
#3
|
||||
|
||||
I blasted my thermostat housing with 100 grit sand and then tumbled it in ceramic media and it came out looking like new, or at least I think so.
__________________
Freddie 1969 Camaro RS/SS396 (427) 4 speed |
#4
|
|||
|
|||
Did mine by lightly blasting with low pressure glass beads then 0000 steel wool to put a light shine in the peaks of the fins to put a very light shine on the flat surfaces. Had to do it twice to get it where I wanted. The key is to not rough it too much in the blast cabinet. I used about 40 psi, just enough to pick up the media and stayed about 8 inches away from it. Just enough really to clean the surface and even out the surface.
I then followed up with the satin finish Ever-Brite to seal the pores and make them easy to keep clean.
__________________
70Z28 04B Norwood Forest Green-white Stripes Black DeLuxe Interior Owned since 1978 - First Car Last edited by BCreekDave; 11-12-2018 at 08:26 PM. |
The Following User Says Thank You to BCreekDave For This Useful Post: | ||
madden (11-19-2018) |
#5
|
||||
|
||||
I recently cleaned up the valve covers for my 71 LT1. I feel like they look right as far as the finish color etc.
I used organic PH neutral cleaner then used neverdull cotton wadding, however they were not too dirty when I started.... The FIRST PHOTO IS FINISHED TWO SECOND PHOTOS ARE PRIOR TO CLEANING.
__________________
~JAG~ NCRS#65120 68 GTO HO 4 spd Alpine Blue /Parchment 2 owner car #21783 71 Corvette LT1 45k miles Orig paint - Brandshatch Green - National Top Flight - last known 71 LT1 built. 71 Corvette LT1 42k miles Original paint - Black - black leather - only black LT1 known to exist. NUMEROUS Lemans blue Camaros, Monza Red and Daytona Yellow Corvettes & a Chevelle or two... Survivors, restored cars, & other photos https://picasaweb.google.com/lh/myphotos |
#6
|
||||
|
||||
Blast them and the steel wool is the best thing I have found other than jerry
__________________
1969 ZL1 COPO Camaro 11.60@120 F.A.S.T 21 1971 LS6 vette 12.20 @118 PSMCDR |
The Following User Says Thank You to 1971ls6 For This Useful Post: | ||
madden (11-19-2018) |
#7
|
|||
|
|||
thx guys
really appreciate the help regards chris
__________________
1970 citrus Yenko Nova |
#8
|
|||
|
|||
I used some walnut media in my blast cabinet, followed with steel wool. I think I could have used glass bead at low pressure with similar results.
|
The Following User Says Thank You to McCune For This Useful Post: | ||
madden (11-19-2018) |
#9
|
||||
|
||||
What grit walnut shell?
__________________
1967 SS427 4 speed triple black survivor-sold to a good home 1969 nova SS396 L78 4 speed triple black survivor 1970 camaro SS350 citrus green,Dad bought it new! 1968 chevelle ss396 L34 M21 KK rear all born with 1972 formula 400 M22 |
The Following User Says Thank You to cwc For This Useful Post: | ||
madden (11-19-2018) |
#10
|
|||
|
|||
vapor hone..google it..the high end motor cycle guys use it on delicate parts..does amazing things on aluminum parts....has that luster everyone is looking for...
__________________
Mark |
The Following User Says Thank You to marxjunk For This Useful Post: | ||
madden (11-19-2018) |
|
|