1967 Camaro Center Dash Panel Question

[Andy]

Originally Posted by Too Many Projects

I thought you were going to buy the repro face plate. The one in the pic appears to be all one panel too. But, if it is just a separate delete plate, it would have studs that go thru the stem holes with washers/fasteners on the backside.

I am. I can't find a repro that's all one panel. Looking really close at the one in that car it looks like it may have a plate on it too. My car has A/C & heat so I guess mine would look like his when I put the block off plate on it, or as close as possible anyway.

[Andy]

Found it in the factory assembly manual.

[jbtech]

This is an original GM Radio cover plate.

[Too Many Projects]

The pic I posted is a repro, radio delete face plate, but it's all 1 piece, not like original with an add on plate for the radio hole. Top hole is heater controls and bottom is ash tray.
Here are 2 vendors with repro delete only plates.
https://www.heartbeatcitycamaro.com/...GM%23-3893845/


https://www.classicindustries.com/product/rd01.html

[Andy]

Does any company make a dash radio repair panel for 67/68 Camaros? The only thing I see is the entire dash assembly. Looks like I'll have to repair the dash anyway to use this delete panel.

[Too Many Projects]

Since you are just going to cover the area, I would fashion a panel by hand from sheet and weld or rivet it in... It only needs to hold the delete plate.

[1967Z28]

Post a want ad here and maybe somebody will have a section of the metal dash that you are looking for.