CRAGAR SS WHEELS - Page 2

**Salvatore** · #11 12-17-2016, 03:57 PM

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JRSully</div><div class="ubbcode-body">Sammy, u still running this set up on the Z.?</div></div>

15X6 in rear with the L60's and 15X4 in the front with 6.40x15. No turning issues. had to go to 6's in the rear because the 7's with the L-60's rubbed the right side exhaust pipe.

Jim Ferron · #12 12-17-2016, 04:38 PM

Those tire are Purr-Fect in the front on that black car!!!

**Salvatore** · #13 12-17-2016, 04:51 PM

I like Rich's set up. He and Joe Barr have the right stance with the right combo.

**DW31S** · #14 12-17-2016, 08:25 PM

Remember that the Cragar SS that are currently being sold have a different type or style of spoke than the earlier vintage we all love. The newer ones are more of a "Square" while the older are more "Round". Many people won't/don't know the difference; car guys will.

**earntaz** · #15 12-17-2016, 10:05 PM

The round spokes flash/sparkle the light during darkness ... the square ones not as much ... TAZ

cwc · #16 12-17-2016, 11:52 PM

My plans are L60 on the rear,the lips were rolled up years ago and 6.40 15 on 15x4 on the front. I'll raise the rear til it doesn't rub and then get my front end where I want it. I've put engine and trans in since that picture, but it's still on the upper control arm bump stops. Here she was around '74

**Salvatore** · #17 12-17-2016, 11:59 PM

I like it cwc.

cwc · #18 12-18-2016, 07:30 PM

Rich,I love the stance of yours,what front springs are in yours,original or replacement?

**YENKO DEUCE REGISTRY** · #19 12-19-2016, 05:40 PM

I think we have 15x8's in the rear with 245 60's, and 15x6's in the front - don't know tire size. This is street driving trim, but for race & show trim we plan to have Rich's setup from above...

markinnaples · #20 12-19-2016, 05:56 PM

Finally got a pair of Cragars for my Camaro. I think the rears are a newer style, but the deal was too good to pass up.