|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
1967 Camaro Valve Cover Spark Plug Wire Holders
I have a 1967 Camaro with a 327/275 and need to know which way the spark plug wire holders on the valve covers are installed. Do they go under or over the reinforcement? A few pictures are attached. The parts in the pictures are not the ones I'll be using but very similar. The reinforcements I have are different in minor ways. The top reinforcement in the picture looks like a big block one. I believe the bottom one is the correct one for my use. It has more rounded edges. The middle one is a little more sharp.
|
#2
|
||||
|
||||
Re: 1967 Camaro Valve Cover Spark Plug Wire Holders
Wire looms go under hold downs (reinforcements). As you noted, first hold down is for a BB.
__________________
69 SS/RS 396 M20 X22 Nor 12B,72B,712 bought 1979 FULL OWNER HISTORY 69 Dick Harrell tribute Day II 427 M20 4.10 X11 76 orig pnt, 711 67 Super Stock 302 Camaro re-creation |
#3
|
|||
|
|||
Re: 1967 Camaro Valve Cover Spark Plug Wire Holders
Thanks for your help. I appreciate it.
|
|
|