|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
#12
|
|||
|
|||
Quote:
-Second undercoat and Prime -Bake -Wet sanding/Buff -First finish coat -Bake -Second Finish Coat -Bake -Polish (Echoes of Norwood page 96 (GM/FB paint process order flow chart) BUT: the process changed again slightly with the phase in of ELPO and the use of the 50,000 gallon electrostatic prime system In the Pre Elpo era of sprayed undercoat and prime, Buffing was done primarily to remove dirt from the undercoat prior to the first paint coat. After the phase in of ELPO primer the paint process featured the addition of buffing before the final reflow oven. After the reflow oven the unit went to the polish station as normal. The car could also be sanded and buffed again in a final step at an area called Automotive General Repair (AGR). |
The Following User Says Thank You to 70 copo For This Useful Post: | ||
southernfriedcj (06-20-2019) |
|
|