#1
|
|||
|
|||
Heater hose clamp
On a 69 s/b the clamp the holds the 2 heater hoses that bolts to the alternator bracket was the bolt a self taping or a nut & bolt that mounted the claamp to the bracket
|
#2
|
|||
|
|||
self tapping
|
#3
|
|||
|
|||
Does anyone have a picture of the correct type used
|
#4
|
||||
|
||||
Just to be clear it is a 1/4 20 machine thread with a chisel tip. NOT a sheet metal screw.
|
#5
|
|||
|
|||
I can get you a picture in the morning. There has been some discussion that some cars did not get a clamp. If your bracket is original does it have threads visible.
__________________
Bill |
The Following User Says Thank You to Billohio For This Useful Post: | ||
m22mike (08-06-2018) |
#7
|
||||
|
||||
Great re; photo Bill, I might hijack that one
And on a side note I have seen a few survivor's without the clamp, along with no threads in he hole. Mike |
#8
|
|||
|
|||
I think skips orange z had a tie on it. I'm not sure if it was random or period they did not use one.
__________________
Bill |
Thread Tools | |
Display Modes | |
|
|