|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
69 camaro RS windsheild bottle holder fasteners
Good day all,trying to determine if screws in picture are assembly line correct for fastening windshield bottle holder from bottom of inner fender & if they are being reproduced.Any input greatly appreciated thanks Marc.
|
#2
|
||||
|
||||
Re: 69 camaro RS windsheild bottle holder fasteners
I have seen 2-3 different fasteners on original cars. My 12B Nor has those screws you picture, Guy close to me with 12C does not. His are like what is used on the ground straps. Seems I saw a repro of what we have in AMK. Do you need the GM # and AMK crossover? As validation, I have owned my car 38 years and that holder was never messed with until I started resto.
Did your car have the plastic screw covers on those pictured needed screws? Mine did not. Just covers on the 3 where the holder fastens to the bracket like your pic shows.
__________________
69 SS/RS 396 M20 X22 Nor 12B,72B,712 bought 1979 FULL OWNER HISTORY 69 Dick Harrell tribute Day II 427 M20 4.10 X11 76 orig pnt, 711 67 Super Stock 302 Camaro re-creation |
#3
|
||||
|
||||
Re: 69 camaro RS windsheild bottle holder fasteners
Yes the caps are at the shop.Thanks for your reply Mr Bently.
|
#4
|
|||
|
|||
Re: 69 camaro RS windsheild bottle holder fasteners
those in the pic just do not seem right - those are trim screws in my opinion...the others bentley talks about is what i have seen installed
and they were phos plated
__________________
Eddie M MBTMF 68 COPO Camaro 9737 non-converted YENKO 69 YENKO SC Camaro, Hugger Orange - born with engine! |
#5
|
||||
|
||||
Re: 69 camaro RS windsheild bottle holder fasteners
The fasteners that amk sells have a bigger diameter they will enlarge the hole on the washer bottle holder if used.Any one have survivor pics they could share.Thanks sYc.
|
#6
|
||||
|
||||
Re: 69 camaro RS windsheild bottle holder fasteners
I can't remember appointments, when a car show is, social engagements and a bunch of other stuff, but 69 Camaro B.S. is engraved on my headbone, lol!
I could not find the one with the ground strap type screws, but here is one with screws similar to the AMK(1st pic) AIM (2nd pic) and the last, (3rd pic) are the ones off my 12B w/factory RS (bag in background says washer bottle) I agree, Eddie, looks like the same screw as wheel house mldng.? Marc-your brkt. looks so nice, doen't anything rust in Canada? Thanks. B.
__________________
69 SS/RS 396 M20 X22 Nor 12B,72B,712 bought 1979 FULL OWNER HISTORY 69 Dick Harrell tribute Day II 427 M20 4.10 X11 76 orig pnt, 711 67 Super Stock 302 Camaro re-creation |
#7
|
||||
|
||||
Re: 69 camaro RS windsheild bottle holder fasteners
Bently thanks for your pics and input,as for the rust in canada our cars are mainly parked because of long winters.and a lot of them being west coast ,southern cars are in great shape to begin with.
Eddie thanks for your reply also. |
|
|