|
|
|
|||||||
| Register | Album Gallery | Thread Gallery | FAQ | Members List | Calendar | Become a Paid Member | Search | Today's Posts | Mark Forums Read |
|
|
|
Thread Tools | Display Modes |
|
#1
08-16-2021, 12:16 AM
|
|||
|
|||
Wanted : power steering pump and mounting brackets
Looking for power steering pump and brackets for 69 z28 restoration !
Also looking for the correct pulley 3941105 DD. Pm please. Thanks Jim 
|
|
#3
08-16-2021, 02:08 PM
|
|||
|
|||
|
"I probley have a pimp and brackets but no deep pulley"
Is this a line from a porno?
__________________
Don't believe everything you read on the internet ... Ben Franklin
|
|
#4
08-16-2021, 02:17 PM
|
|||
|
|||
|
Whatever you do, do not try using a repro pulley. Pure junk. I also would not consider repro brackets.
Sent you a pm.
__________________
Don't believe everything you read on the internet ... Ben Franklin
|
| The Following User Says Thank You to Lynn For This Useful Post: | ||
Jims69z28 (08-16-2021) | ||
|
#5
08-16-2021, 06:50 PM
|
|||
|
|||
|
Be aware that you must use a 1969 Camaro power steering pump, designed for variable-ratio steering. The service replacement variable ratio power steering gear was pn 3960246. It does not functionally interchange with anything; only application is the 1969 Camaro.
Chevrolet admonished against interchanging standard and VR steering components: “The pump used on vehicles with variable ratio power steering provides increased fluid flow at higher pressure than the conventional pump. Consequently, the conventional pump and the pump used with the variable ratio system are not interchangeable. A new pump outlet hose is required on variable ratio power steering equipped cars.”
__________________
Learning more and more about less and less...
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
