|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
1991 Z28 5.0 TPI ignition timing
I helped my son with an engine rebuild for the aforementioned car. He dropped the engine back in and neglected to set the initial static timing on the distributor. I vaguely remember having to disconnect the distributor from the ECM in order to properly set the initial distributor timing. Does anybody remember what the proper procedure is for this car?
Thanks Steve
__________________
Steve H. industrial art collector |
#2
|
||||
|
||||
Re: 1991 Z28 5.0 TPI ignition timing
Sold my IROC a few years ago, and it's been a while since I had to time a TPI engine, but there is a brown wire near/above the heater/AC box that needs to be disconnected. Just unplug the wire, time the engine, then reconnect the plug.
Hope this helps.
__________________
Rick 1966 Chevy Caprice 427-390 2012 Chevy Camaro RS Convertible] |
#3
|
|||
|
|||
Re: 1991 Z28 5.0 TPI ignition timing
Many thanks, hope to take a little "spin" in it before the snow hits again tomorrow!
__________________
Steve H. industrial art collector |
#4
|
||||
|
||||
Re: 1991 Z28 5.0 TPI ignition timing
Yup, they are fun cars to drive like you stole them.
__________________
Rick 1966 Chevy Caprice 427-390 2012 Chevy Camaro RS Convertible] |
|
|