#1
|
||||
|
||||
Cragar SS 15x8
I'm looking for a pair of vintage 15X8 Cragar SS wheels. They must be for 4.75 GM bolt pattern with 4.25-4.5” backspace.
I may consider unilug with round spokes only. I don't want to order new wheels as the spokes are different than the old ones. Thanks, Kurt
__________________
1969 SS396 Post Sedan Delivered to Van-T Topeka KS MCACN Day2 Concourse Gold Award 1968 Schwinn Orange Krate Original Paint 1970 Schwinn 3-Speed Deluxe Original Paint Last edited by 69 Post Sedan; 12-01-2018 at 09:30 PM. |
#2
|
||||
|
||||
Re: Cragar SS 15x8
Bump
|
#3
|
||||
|
||||
Re: Cragar SS 15x8
Still looking.....4.75 back spacing will work also.
|
#4
|
||||
|
||||
Re: Cragar SS 15x8
I picked up one a few weeks ago. If you are lucky enough to find another orphan let me know. Good luck!
|
#5
|
||||
|
||||
Re: Cragar SS 15x8
Sounds good Paul.....what is the backspace of the wheel you bought?
Kurt |
#6
|
||||
|
||||
Re: Cragar SS 15x8
I'll have to verify, but pretty sure 4.5.
What tires you gonna run? |
#7
|
|||
|
|||
Re: Cragar SS 15x8
You may want to check out Cragar SS Aficionados on Facebook. There's a couple guys on there who have collected a lot of Cragars and have sold some on there. Also, Whitetop on here, aka David Miller, may have a line on some as he's a big Day 2 guy.
__________________
1968 Camaro Ex-ISCA Show Car John 10:30 |
#8
|
||||
|
||||
Re: Cragar SS 15x8
Paul, I want to put a set of vintage M&H Racemaster slicks on them.
Thanks for the heads up Mark.....I'll do that. Thanks, Kurt |
#9
|
||||
|
||||
......still looking.
Thanks, Kurt |
#10
|
||||
|
||||
Bump
|
Thread Tools | |
Display Modes | |
|
|