1968 CAMARO KUSTOM HEADERS

[69 JL-8]

HI, WOULD THESE HEADERS BE ACCEPTABLE FOR A 69 Z-28. I UNDERSTAND THAT THE DRIVER SIDE HEADER HAS AN ADAPTOR BRACKET FOR THE ALTERNATOR ON 68'S. DOES ANYONE HAVE SPECIFIC INFORMATION ABOUT THESE HEADERS? THANKS, JEFF

[firstgenaddict]

They will fit and I bet they were still available over the counter at Chevrolet in 69... What do you mean by acceptable? If I am not mistaken Kustom made the 67-68 Camaro Dealer available Headers.

[69 JL-8]

DID THESE HEADERS HAVE ANY MARKINGS OR STAMPINGS ON THE FLANGES? DID THEY ALL HAVE 4 BOLT COLLECTORS? THANKS, JEFF

[Andy]

[ QUOTE ]
HI, WOULD THESE HEADERS BE ACCEPTABLE FOR A 69 Z-28. I UNDERSTAND THAT THE DRIVER SIDE HEADER HAS AN ADAPTOR BRACKET FOR THE ALTERNATOR ON 68'S. DOES ANYONE HAVE SPECIFIC INFORMATION ABOUT THESE HEADERS? THANKS, JEFF

[/ QUOTE ]

you may find this site helpful. http://taperfresto.com/1968_gm_facto...oduction_.html

[TXZS]

[ QUOTE ]
DID THESE HEADERS HAVE ANY MARKINGS OR STAMPINGS ON THE FLANGES? DID THEY ALL HAVE 4 BOLT COLLECTORS? THANKS, JEFF

[/ QUOTE ]Jeff, the Kustom headers optional from the General had four-bolt collector flanges, some were round and some were square, but all were four-bolt. If you have a set which you think might be originals, check with Jerry MacNeish or Wayne Quinn.

[budnate]

check this out as well.

http://cgi.ebay.com/ebaymotors/69-CA...Q5fAccessories