Quote:
Originally Posted by njsteve
He built a 461 stroker with 474hp/550 torque off the original 400 engine in his 78 T/A.
|
Knowing Bob , it didn't seem kosher that he would have used the #'s engine from his low mile Gold Y88 4spd Survivor to do that build .
He didn't use it
He used a donor "garden variety" 400
Quote:
The original W72 engine is on a stand and tucked away. I pieced together a spare XX block that is stroked, 6X-4 heads with the full SD Performance port and polish job, and an original intake that was also heavily worked and cleaned up by SD.
The carb is a spare with rebuild kit by Cliff, and the distributor is an aftermarket HEI. It was dynoed at Kauffman
The numbers were peak HP of 474 at 5100 rpm and peak torque of 549 at 3600
|
I think Bob might have went a bit "soft" on the Cam.
HP and peak rpm could have been moved on up - if he had wanted to.
I'm sure he got what he was wanting to get though.
06-21-2018, 06:57 PM
Threaded Mode