|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Four Speed transmission to bellhousing mounting bolts. Grade 5 TR head marking. Very nice condition $35 PP FF ************SOLD************
Last edited by Enoch; 10-07-2019 at 10:19 PM. |
#12
|
|||
|
|||
Four Speed and automatic speedometer cable adapter retainers and mounting bolts. The set on the left is restored and has C stamped on the retainer. $25 The set on the right is on restored and has no marking on the retainer. $15
This unique U stamped head marking bolt is difficult to find. Last edited by Enoch; 12-03-2019 at 10:43 PM. |
#13
|
|||
|
|||
Two sets of original fan clutch mounting hardware. The restored set has SBC (***SOLD***) for its head marking and the unrestored set has AS (***SOLD***) for its head marking. Extremely nice original pieces. $35 per set ppff (X)
Last edited by Enoch; 09-20-2019 at 05:06 PM. |
#14
|
|||
|
|||
1971 to 1976 oil fill cap, rubber with patent pending and part number embossed on the inside lip. Two available $15 each ppff. (X)
************BOTH SOLD************ Last edited by Enoch; 09-30-2019 at 04:58 PM. |
#15
|
|||
|
|||
Intake manifold stud, has various applications, one is for the TCS solenoid and vacuum advance line clip, the other is for 396 Z16 and L 78 Corvette fuel filter and also fuel injected Corvettes. Original short and stud on the top with dimple. $20. Ppff (X)
|
#16
|
|||
|
|||
Original Muncie backup light switch mounting brackets. I have six brackets with a W stamp on them that mount the switch to the transmission. $15 each. Very nice original pieces none of them rusted most have a good portion of their original plating. Next is a bracket with a W stamp a shield and 2 IM head marking bolts. Very nice piece. $40.
|
#17
|
|||
|
|||
Very nice unrestored set of dimpled Holly carb studs. Very nice great patina perfect for a survivor or will clean up beautifully for a restored car. $40
Last edited by Enoch; 12-03-2019 at 10:25 PM. |
#18
|
|||
|
|||
Five different original small block balancer mounting bolt kits. Included are 1 with safety wire hole that was used from 1960 till sometime in 1969 and 4 without safety wire holes head markings include
[] $30 TR. $30 A $30 CH $30 TR w/safety wire hole $40 Last edited by Enoch; 12-03-2019 at 10:27 PM. |
#19
|
|||
|
|||
Original rear brake line brass block shouldered bolts. These secure the line by attaching the brass block to the bracket that bolts to the rear end cover. Very nice and very hard to find originals.
1. L headmarking 2. WB headmarking $20 each ppff Last edited by Enoch; 12-03-2019 at 10:52 PM. |
#20
|
|||
|
|||
1970 to 72 small block TCS vacuum switch. 1 1 1 4 4 3 2
Excellent original condition. $25. ************SOLD************ Last edited by Enoch; 12-03-2019 at 10:34 PM. |