Andy's 66 Caprice LS Conversion Upgrade - Page 9

**Xplantdad** · #81 10-20-2016, 01:59 AM

Betcha Andy can't wait!!

ImpalaAndy · #82 10-20-2016, 12:55 PM

Betcha right!

**kwhizz** · #83 10-20-2016, 11:33 PM

Exhaust is in and the car is back........Another great job by Dave's Mufflers in Kenosha.......James works his magic again

**Xplantdad** · #84 10-21-2016, 12:22 AM

Looks great!

**olredalert** · #85 10-22-2016, 02:28 PM

----He is going to waste those tires......Bill S

**napa68** · #86 10-22-2016, 10:46 PM

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Those tires may be the only thing to keep that 10 bolt alive [img]<<GRAEMLIN_URL>>/

[/img]

**kwhizz** · #87 10-23-2016, 12:27 AM

Got pretty much all the under hood wiring completed today......went to spin the engine over and found out the neutral safety switch is toast......Andy ordered a new one and that will be his winter project to install it.......LOL....Then we had a major disaster.......added coolant to the Radiator to top it off and come out the next morning and a puddle of coolant under the car......Humm !!!!.......Ended up being a pin hole in the Radiator weld seam..........Sheesh !!!!.......First we had Keith's car dropping dirt all over the place, now we have Andy's "Leakasourus" dumping coolant all over the place.........Time to call the Hazmat team again ............Time to get this "Beater" out of the garage......Andy is coming to drive it home next Saturday...........Put a self tapping screw with a rubber grommet thru the Radiator hole and tightened the screw squishing the rubber grommet to seal the leak till the new Radiator shows up and Andy can replace it at his place.......LOL

Need to hook up the Vacuum line to the Brake Booster and everything else left to do is get all the Dakota Digital gauges and modules installed....Almost done.....Then off to SEMA to Relax.......

**Xplantdad** · #88 10-23-2016, 02:25 PM

Awesome!!! [img]<<GRAEMLIN_URL>>/cool.gif[/img]

**kwhizz** · #89 10-23-2016, 02:45 PM

Getting started on the "Inside" car stuff this morning.........Got the Gas pedal installed and plugged in.....also took the Dash out to get the Dakota Digital install going......Again.....Look at the Dust on the dash assy.........Sheesh !!!......at least the dust fell inside the car and not on the floor.......

KM265S · #90 10-23-2016, 03:07 PM

THANK GOD you found some dirt. Now I don't feel so bad.