Replacement for 1969 Starter Solenoid

[CamarosRus]

Is there a aftermarket starter solenoid that "looks' very close
to Delco Originals......

I'm in process of restoring a 9 K 22 Delco Starter and need
a NEW appearing Solenoid !!!!!!!!!!!

[BCreekDave]

Depends on what "looks" means. None that I know of that have the Delco Remy solenoid marks

[CamarosRus]

I understand and agree with your point Dave...........

As hard as they are too SEE when installed in the car
is there a particular aftermarket brand that "LOOKS"
Ok ????

[Zman1969]

Chuck my new go to is Napa

https://www.napaonline.com/en/p/MPEST124SB

https://www.napaonline.com/en/p/ECHS...pid=MPEST124SB

https://www.napaonline.com/en/p/ECHS...pid=MPEST124SB

last 2 are Echlin which IMO are good quality

Also on RockAuto has Standard Motor products

https://www.rockauto.com/en/moreinfo...pt=4188&jsn=11
and
https://www.rockauto.com/en/moreinfo...&pt=4188&jsn=8

[169indy]

I have had limited success grafting a Old DELCO cap to a replacement Coil body. It gets a little tricky given different mounting molded back sides and contact matching, but I can be done to gain a fresh wound core with a original looking nose.

[John Brown]

D969 solenoid 1114356 was the Delco Remy/GM replacement number, but I'm all out of them. 12bolt_tom on ebay bought the last of the Studebaker International inventory that fit Chevrolet engines used in 65 and 66 Studebakers they had in their inventory at the South Bend location. I know for a fact they had some open box/out of the box nos solenoids, because I bought all of the still unopened ones they had. You might try contacting 12bolt_tom.

ebay.com/12bolt_tom

[BCreekDave]

Were assembly line solenoids black or zinc plated? Seems like I've seen both.

[X66 714]

Originally Posted by BCreekDave

Were assembly line solenoids black or zinc plated? Seems like I've seen both.

1969 big block the entire starter was black including solenoid & cast iron nose.....Joe

[BCreekDave]

Originally Posted by X66 714

1969 big block the entire starter was black including solenoid & cast iron nose.....Joe

Thought so in 70 too.

[X66 714]

Originally Posted by BCreekDave

Thought so in 70 too.

I don't know 70's but you're probably correct. I can only state what I know is fact.....Joe