|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
'68 Corvette Convertible, #s 427/400hp/Tri Power
This car looks quite nice for the $39,900 opening bid. It's a strange market - so I doubt it will sell on Ebay, but if I were looking for one I'd have to inquire about this car.
Link to 1968 427 Corvette auction 194678S419581 |
#2
|
|||
|
|||
----I'm not a 68 fan but this vert looks very nice. The double stamp appears OK, and I'm fairly sure I see the broach marks. Pad must have been rusty before it was cleaned. Tele column is a good addition, along with the speedminder speedo. Can't quite see if it has PS, but he probably would have mentioned it if it was so equipped. I often look under the hood at the rain gutter edges. If they aren't crisp and sharp, and the harness clips either aren't there or in the wrong spot I start to worry about the nose. This 68 looks good, but, as usual, eye's on it are important!!!.....Bill S
|
#3
|
|||
|
|||
Someone put 69 or newer rallyes on it as they appear to be the 8" wide ones and not the 7" as were stock on 68 Corvettes.
|
#4
|
|||
|
|||
think I would take a really good look at that block stamping
|
#5
|
|||
|
|||
What makes you worry about the stamping? It looks great to me.
Jason |
#6
|
|||
|
|||
I can see the assembly date twice but is there a light VIN stamp also??
__________________
Bill |
#7
|
||||
|
||||
Stamp looks like it's sorta double stamped - while leaning heavy to the right side - like a double tap while hitting - might've ended with a smashed finger for the stamper at Tonawonda... ow.
|
#8
|
||||
|
||||
Just wondering if that light stamp is too close to the head to have been made by the Tonawanda gang stamp :-(
|
#9
|
|||
|
|||
I thought the same bergy
__________________
Bill |
#10
|
|||
|
|||
I previously had an original '69 390 car with a similar stamping.
__________________
1969 Camaro Z/28 59K mile Dusk blue survivor 1972 C10 Cheyenne Super SWB |
The Following 3 Users Say Thank You to billneumiller For This Useful Post: | ||
|
|