|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Original 69 GM Derby Caps Wanted
Looking for a correct set of show quality derby caps for 69. Ideally a set of originals with the double ribbed boss on the inside of the caps. Let me know what you have. Thanks
__________________
I like solid lifter cars, big cams and cars w/ 3 pedals in them. |
#2
|
|||
|
|||
Example of the double ribbed boss ? I know I have a NOS set somewhere and a ton of used.
__________________
...... |
#3
|
||||
|
||||
Charley,
I dug up these two for now and will try to explain what I learned from Mike Thorpe (rszmjt) on the subject of factory issued derby caps. He's handled thousands of these caps and has been checking them since the 1970's for differences between them. The parts numbers most know for these are 3925801 or 3925805 but they both differ by time frame issued and were also remade by various manufacturers under GM. The early factory originals for 1969 have a double casting rib (or flute) where the screws from the backside of the rings secure to the caps on each of the 4 screw locations. Original production line installed rally wheel caps have this double rib inside, have the GM part number 3925805 and also say made in Canada inside the cap. I think they were made by McKinnon Industries for GM but not positive on that one? The later versions have a single casting rib (or flute) with one of the above part numbers and in the last 15 years or so, the part number had disappeared completely. They also have various casting flash differences from the factory issued caps or the early over the counter parts but are easy to spot from originals. Below are a couple pictures that simply address the casting ribs, but do not go into the comparisons of the outer fonts and such. I have also been told that 68 and 69 caps differ from each other on the outer beveled edges of the rings where one is more rounded than the other and that the 69 has more pronounced flat edges with a sharper radius. Here's the 69 version with the sharp edge along the outer edge of the ring. The later 3925805 part numbers differ widely in the casting flash inside the caps from what is obviously different vendors for GM. They also have different fonts and ring sizes on the outside cap as I have come to learn but still don't know enough about that. I have had 2 sets of originals including a 68 driver with factory issued derby's with the double ribs and made in Canada markings, but quality was poor.
__________________
I like solid lifter cars, big cams and cars w/ 3 pedals in them. Last edited by NorCam; 04-06-2018 at 11:31 PM. |
#4
|
|||
|
|||
Quote:
I have some originals (3 non-double fluted and 1 doubled fluted) that are identical to your top photo on my survivor 68 Z.....Did they have two that are factory original??
__________________
67 Z/28 Butternut Yellow 69 Z/28 Rally Green 69 Z11 Pace Car (2) 69 RS/Z28 Lemans Blue / Olympic Gold 2010 2SS RS Aqua Blue 68 Z/28 Lemans Blue C7 Corvette 68 SS Lemans Blue |
#5
|
||||
|
||||
Another showing double ribbed cap. Marked Canada as seen and believed to be an original factory assembly line installed cap.
__________________
I like solid lifter cars, big cams and cars w/ 3 pedals in them. Last edited by NorCam; 05-09-2017 at 04:32 PM. |
#6
|
||||
|
||||
Better pics showing another original assembly line double ribbed cap, and another single ribbed cap. The attaching screws also have different markings where the assembly line cap has a triangular marking on the screw head.
Double ribbed with head markings on the screw Single ribbed with different screw as well
__________________
I like solid lifter cars, big cams and cars w/ 3 pedals in them. |
#7
|
||||
|
||||
Learned something new today!
__________________
|
#8
|
|||
|
|||
Same here. Just when I thought all of these caps were created equal
|
#9
|
|||
|
|||
I found some but what is a nice double rib set worth ?
__________________
...... |
#10
|
||||
|
||||
PM on the way.
__________________
I like solid lifter cars, big cams and cars w/ 3 pedals in them. |
|
|