ASSEMBLY LINE CORRECT SUBFRAME BUSHINGS

[ALLZS]

DID OR WAY & HOW DID THE FACTORY TAPE THE BUSHINGS TO THE SUBFRAME

[camaromb]

On the original cars I've seen the tape was used to cover the body holes over the rear bushings, the bushings were not taped to the subframe.

[enio45]

yep what mark said

[m22mike]

Rich
As stated by Mark there was tape over the rear sub frame holes. This was placed there during a body water leak test. It is a general misconception that the bushing were taped in place.
Here is a good shot of the that tape, sticky side up. At least on Camaro.
http://www.yenko.net/ubbthreads/pics/usergals/2016/01/full-2974-37450-230863_img_0957.jpg

[ALLZS]

THANKS FOR ALL THE INPUT THANKS FOR THE PICTURE

[Scott69Z]

What kind of tape was used on the floor?

Scott

[m22mike]

The ones I have had look like 2" black masking type tape.

Mike