Corvette Parts

[Enoch]

In this listing I will continue to post multiple Corvette items

3 original unrestored vented gas caps, 63 through 70. $50 each, or all three for ALL SOLD $120. ALL SOLD

68 true 69 Corvette early tri-power accelerator cable mounting bracket. Without return spring hole. Very nice original piece with original Bolt. $50

68 through 72 windshield wiper door actuator accordion boot. Original thin wall design. $40. 3 available.

68 through 74 motor to frame ground cable and bolts. $40 each. 2 available. Excellent original Survivor condition.

Original 68 through 72 windshield wiper door override knob, solid black. $50, 2 available

[sixt9rsx33]

What month did the tri power cable mounting bracket get the hole for the return spring?

Thanks

[Enoch]

Actually thanks for pointing that out it's 69 that has the extra return spring bracket and no hole. 68 had the hole and they switched it because it interferes with the secondary linkage. I'm not positive when they switched it over.

[Enoch]

66 67 and 68 427 radiator saddle brackets with original rubber and the original grade 8 RSC head marking bolts and large oversized washers. Perfect for a survivor car. Completely unouched. SOLD $100 shipped to the lower 48. SOLD

[Enoch]

65 route 74 big block rear axle caps and mounting bolts. Original restored. The reproduction caps don't fit correctly. WB head marking on the bolts. Excellent restored condition. $100 shipped to the lower 48. Three sets available with WB head marking bolts and four sets available with BTS head marking bolts. Ppff

(Edit two sets with WB head marking left.)

[Enoch]

63 to 72 dimmer switch with flat end, no recessed dimple by the rivet. They don't reproduce these. Excellent condition also included are too original dimmer switch screws with original turn down tips and self cutting threads. Another item that is not being reproduced correctly. $40 shipped to the lower 48 ppff. 2 available

[Enoch]

One pair of NOS 63 to 72 under car exhaust ground straps. These are the ground straps that go from the transmission crossmember to the guillotine clamps connecting the front head pipes to the rear tail pipes. Excellent original pieces. $100 shipped to the lower 48. Ppff

[Enoch]

65 through 74 big block power steering alternator and pump mounting hardware. All original Hardware they don't reproduce these with the correct head markings and grade. $100 shipped to the lower 48 ppff

[Enoch]

1. 63 through 72 front pinion snubber bolt. WB head marking grade 8. Perfect original unrestored condition. $40

2. 63 through 72 strut rod 2 rear mounting bracket bolts, WB head marking grade 8. Excellent Survivor condition $50

3. 63 through 72 rear end 2 crossmember and rear end crossmember to frame mounting bolts. WB head marking grade 8. Excellent Survivor condition $60

4. 63 through 72 NOS rear outer leaf spring cushion washers with stampings and nuts with markings. $60

5. 63 through 72 rear trailing arm front pivot bolts, P head marking grade 5. Excellent Survivor condition. $50

6. 63 through 64 rear end pinion bracket to rear mounting bolts. Long M Bolt grade 5, short and bolts grade 8. Excellent unrestored condition. $60

All prices include shipping to the lower 48 if paid with PayPal friends and family.

[Enoch]

Pic

[Enoch]

68 through 71 Corvette transistor ignition amplifier to fender well mounting bolts. L5 head marking. Excellent original plating perfect for Survivor. $50 ship to the lower 48 if paid with PayPal friends and family.

[Enoch]

66 through mid 68 Corvette transistor ignition to fender skirt mounting bolts. TR head marking. $50 shipped to the lower 48 if paid with PayPal friends and family

[Enoch]

65 through 74 Corvette and 65 through 68 Camaro Chevelle Nova short water pump big block alternator mounting bracket. Excellent original condition. $55 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

63 through 72 Corvette engine frame mounts to engine mount ground strap, externally toothed star washer and E head marking bolt. Excellent survivor condition. $45 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

63 through 74 Corvette rear outer leaf spring mounting bolts. NOS. See head marking. Still retains all of its original black phosphate coating. $50 shipped to the lower 48 if paid with PayPal friends and family Two sets available.

[Enoch]

63 through 74 Corvette rear strut rod adjusting bolts and Hardware. The cam bolts have an M stamping on the washer and the opposing cam washer has a flying f mark stamped into it. These pieces are in perfect original day one takeoff condition. No pitting no rust whatsoever. As nice as you will find. Also included are original lock washers nuts and strut rod bushing caps. $80 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

63 through 74 Corvette rear trailing arm front pivot mounting bolts. P head marking extremely nice original pieces. These are always usually rusted. Still retains most of their original plating and patina. As nice as you'll find. $45 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

69 through 74 pinion snubber to rear bracket mounting bolts. Grade 8 SBC head marking. Perfect original condition still retain most of its original plating. As nice as you will find. $45 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

63 through 74 rear pinion snubber mounting bolt. This is the front bolt that mounts the pinion bracket to the cushion to the frame. Excellent original unrestored condition still retains most of its original plating. Dog bone head marking. $30 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

65 through 68 pinion snubber to rear end mounting bolts. One P head marking dog point bolt and one M head marking flat tip bolt. Excellent original unrestored condition. Still retain most of their original plating. As nice as you will find. $50 shipped to the lower 48 if paid with PayPal friends and family. Two sets available.

[Enoch]

63 through 74 Corvette front lower control arm to frame mounting bolts and nut plates. The bolts have WB headmark while the nut plates have N in a circle stamped in them. All pieces are 100% original unrestored still retain a good part of their plating. $60 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

63 through 74 Corvette rear strut rod bracket to rear end mounting bolts. WB head marking; also included are original lock washers and flat washers. Excellent original pieces. Still retain most of their plating. $50 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

63 through 74 rear strut rod bracket mounting bolts. AS head marking. Excellent original pieces. $40 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

63 through 74 Corvette gas tank brace to frame mounting bolts. Grade 2, C head marking. Excellent original pieces. $40 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

63 ZO6 and 64 through 67 big tank lid cover bolts. These six bolts attach the large fiberglass tank cover to the bulkhead just behind the rear seats. Original D head marking. $60 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

63 through 68 Corvette front sway bar to frame bushing retainer mounting bolts. These are also correct for 65 through 68 big block rear sway bar bushing retainer to frame bolts. RBW head marking. Excellent original unrestored condition. $60 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

68-69 Tri Power air cleaner elbow breather Tower clamps. 1 1/2", 1 is dated 1/68 the other 2/68. Excellent original unrestored condition still retains most of their original plating. $80 shipped to the lower 48 if paid with PayPal friends and family. These are the real deal and hard to find.

[Enoch]

68 through 74 Corvette gas tank strap to frame mounting bolts. Excellent restored condition. RBW head marking. $35 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

65 through 68 Corvette front spindle to knuckle mounting bolts. Grade 8 m head marking. Excellent original pieces unrestored condition. Also included 4 original Acorn style lock nuts. $60 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

63 to 67 Corvette power window conduit mounting hardware. Four original anchor head marking bolts and two flat nuts with the original olive drab Dip paint on them. These are 100% the real deal still retain 99% of the original plating and are perfect for either Survivor or restored car. They do not reproduce this bolt even remotely close. $80 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

63 through 67 Corvette rear lower Valance mounting hardware. Correct original grade 2 rbw head marking bolts along with large flanged rbw head marking nuts. Perfect restored condition. $80 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

63 through 67 Corvette kick panel screws. 14 original excellent pieces. $80 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

67 Corvette 40 amp power window and headlight motor up down switch circuit breaker. Excellent original condition with original nuts. Great patina on the plating and littelfuse markings on Bakelite. $40 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

66 67 68 Corvette transistor ignition amplifier and harness mounting hardware kit. Included are three original unrestored TR head marking amplifier to Fender skirt mounting bolts with lock washers and nuts. 1 D head marking harness ground wire to radiator support mounting bolt and externally tooth star washer, one original rubber-coated J clip and D head marking mounting bolt for firewall and one original rubber-coated harness clip that attaches to the radiator support and holds the harness in place. Excellent original pieces that are very difficult to find and source. $120 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

63 through 67 Corvette Hood prop mounting bolt kit. The two flat and bolts with the captured lock washer attached to hood prop to the hood while the two pointed tip bolts with captured flat washers attached the hood prop to the fender skirt. Excellent original restored pieces. $60 shipped to the lower 48 if paid with PayPal friends and family.

[Enoch]

64 through 74 Corvette shifter to shifter bracket mounting bolts. Long bolt has CP head marking uses the internally tooth star washer while the short bolt has TR head marking and uses the lock washer. Excellent unrestored original pieces. $30 shipped to the lower 48 if paid with PayPal friends and family.