PDA

View Full Version : Best headers 1969 z28 oem

the427king
03-08-2021, 02:09 AM
What is best header to use that is closest in appearance to stock originals? And are they reproed?
STEFS
03-08-2021, 03:59 PM
I would call the guys that bought all the tooling from Jerry Stahl they are in PA and are making headers now.Jerry had originals that he was duplicating.
the427king
03-08-2021, 07:14 PM
Thanks for the info.
L72copocamaro
03-09-2021, 04:45 PM
Good info! Anyone have a number for them?
ChimChim
03-10-2021, 12:42 AM
Is this the same person?

http://eastcoastdragtimeshalloffame.com/the-racing-industry-looks-back-at-the-career-of-jere-total-tuned-stahl/
STEFS
03-10-2021, 02:44 AM
Yes it is
STEFS
03-10-2021, 02:15 PM
so the guys that bought out Jerry Stahl when he passed are ACP headers check there web site phone 717-846-1632
Jonesy
03-10-2021, 03:44 PM
https://acpheaders.com/contact-us.html
1967Z28
03-10-2021, 04:39 PM
When Jere Stahl built headers in the late '60s he used the same upper flanges that were used on the '67 Camaro factory headers made by Bill Thomas/Douglass Muffler Mfg. The upper flanges changed in the '70s. The Stahl headers (now ACP) are premier headers but they do not resemble the factory headers used on Camaros back in the late '60s. Larry Christensen was reproducing the factory OEM style headers as recently as a couple of years ago but I'm not sure if he still is.
jl8z28
03-10-2021, 05:16 PM
I got these headers with a bunch of NOS 69 Camaro sheet metal they were painted the same as the sheet metal would anyone know anything about these
Lee Stewart
03-10-2021, 05:52 PM
https://i.postimg.cc/hjYD7WRL/z.jpg (https://postimages.cc/)

Factory Z/28 headers
mhm1966
03-10-2021, 06:24 PM
Lee,

Do the collector flanges have three or four bolt pattern?
Lee Stewart
03-10-2021, 06:42 PM
Lee,

Do the collector flanges have three or four bolt pattern?

What you see is what you get :dunno:
Billohio
03-10-2021, 11:22 PM
top one appears to have 4
169indy
03-11-2021, 01:56 AM
When Jere Stahl built headers in the late '60s he used the same upper flanges that were used on the '67 Camaro factory headers made by Bill Thomas/Douglass Muffler Mfg. The upper flanges changed in the '70s. The Stahl headers (now ACP) are premier headers but they do not resemble the factory headers used on Camaros back in the late '60s. Larry Christensen was reproducing the factory OEM style headers as recently as a couple of years ago but I'm not sure if he still is.

YUP!

Re-pops! (1968 version Kustom 4 hole flanges)
x33rs
03-11-2021, 02:46 PM
When Jere Stahl built headers in the late '60s he used the same upper flanges that were used on the '67 Camaro factory headers made by Bill Thomas/Douglass Muffler Mfg. The upper flanges changed in the '70s. The Stahl headers (now ACP) are premier headers but they do not resemble the factory headers used on Camaros back in the late '60s. Larry Christensen was reproducing the factory OEM style headers as recently as a couple of years ago but I'm not sure if he still is.

Last time I talked to him he still was. I should say he has someone do them for him, but they are specifically for 67-68. When I asked he was hesitant to tell me if they fit 69's with back drive linkage. My feeling from that conversation was that they do not, if they did I felt he would have just said so. With all the 69's he's had or has, he would have known.

Thought we had a conversation about this a while back and I posted his contact info then. If back drive linkage isn't a concern, then the 68 style he offers look good from what I've seen of them. I only mention this because OP's question is for a 69.