69 Camaro Parts
 

Horns #289L and #290H for Late Mar 69 build date

Rosewood Vinyl for dash (glovebox, ashtray etc)

Tips on restoring my original rosewood steering wheel

Linkage only for Hurst 4spd/camaro/M21
(I have the shift handle and linkage body)

Info on the proper way to block off smog tubes

and finally
Gold Chicken lips --- NOS right rear wheelwell trim

Re: 69 Camaro Parts
 

I have a complete set of NOS wheelwell trim, but I won't separate. $700.

Re: 69 Camaro Parts
 

PM sent

Re: 69 Camaro Parts
 

Contact JohnZ about how to block off the smog system.

I have a 290 horn that I disassembled, cleaned the internal coil and reassembled. It still did not function. I do not know what the date code is but I can check if you are interested.

Re: 69 Camaro Parts
 

Got the horns covered, thanks

Re: 69 Camaro Parts
 

I noticed your post stating you have a set of NOS wheel well trim for a 1969 Camaro. Does the front or rear mouldings have a half moon cut out where the screw holes are?
Thanks

Re: 69 Camaro Parts
 

If you need a NOS dashpad for a non-air car EBAY listing ends tonite. https://www.yenko.net/ubbthreads/imag...s/headbang.gif

Re: 69 Camaro Parts
 

Not exactly sure what you are asking. All of the moldings I have simply have the holes punched. I have a couple of original pieces, and they have no half moon cutouts either...unless I don't understand what to look for...entirely possible!

Some are in the very old tan paper with blue print packaging and some is the newer GM white paper and clear plastic packaging.