A/C hose rebuilding service?
 

I need to get one of the unique A/C hoses rebuilt for my Grandfather's 1971 Lincoln Continental. The hose was rubbing against the master cylinder, and wore a hole in the rubber section of the hose. These cars were unique in that they used a GM A6 compressor and the complete Frigedaire A/C setup just like any 1970's GM car. No one makes the replacement hoses for them.

Does anyone out there recommend a specific shop that can replace the rubber hose section and reattach the ends (or replace them)?

Thanks.

Here's the link to the car:

https://www.yenko.net/ubbthreads/ubbthrea...-a-l#Post539151

Re: A/C hose rebuilding service?
 

I think any of the vintage A/C guys can rebuild hose assemblies. Here is Classic Auto Air's website

http://www.classicautoair.com/GM_OEM...ml#restoration

Jake

Re: A/C hose rebuilding service?
 

Didn't NAPA stores make & repair AC & hydraulic hoses at one time?

Re: A/C hose rebuilding service?
 

They still do. Just take them your old hose. The fittings probably won't look like the originals though. Just a good functional repair that fits.

Verne [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img]

Re: A/C hose rebuilding service?
 

Steve, go to industrial rubber supply 7 chimney rock road just around the corner from where I used to be Across the street from UPS. They can make any hose you need on the spot while you wait. Rich.

Re: A/C hose rebuilding service?
 

Thx Rich. I think I may have checked with them in the past and they do hydraulic lines but not A/C lines. I will recheck with them tomorrow and see.

Re: A/C hose rebuilding service?
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: VintageMusclecar</div><div class="ubbcode-body">Didn't NAPA stores make &amp; repair AC &amp; hydraulic hoses at one time? </div></div>

Napa only seems to do hydraulic hoses now. They said they had too much trouble with the A/C fittings leaking.

Re: A/C hose rebuilding service?
 

I called Industrial Rubber and they can make their own working version of an existing A/C hose but only if they have the proper ends in stock. They also use an industrial hose that is much thinner than the thick original hose. The real deal-killer is that they can't reuse the uniquely bent ends on the original hose. So that rules them out.

I sent the hose to Classic Auto Air in Tamps this morning. They will give me an estimate when it arrives.