shifter bracket for a 69 chevelle
 

I have a Hurst competition plus shifter for my 69 Chevelle it it sits in the middle but when you bolt the top bolt it hits the tunnel any one know what mounting plate would make it work properly https://www.yenko.net/ubbthreads/pics...9-imag0709.jpg
https://www.yenko.net/ubbthreads/pics...0-imag0708.jpg

Re: shifter bracket for a 69 chevelle
 

Could you shim it with a couple of washers behind the mount, as long as it dosnt affect the rods functioning? I had an aluminum mount on mine without the console and it lined up ok, looks like you have the right mount on yours. Good luck with it

Re: shifter bracket for a 69 chevelle
 

Andy the problem is its sitting to high and hitting the tunnel I was wondering if there's a plate that's a little lower I need to talk to crash any one know how to contact him his PM box is always full

Re: shifter bracket for a 69 chevelle
 

PM is turned off,,, E-mail me...

[email protected]

Re: shifter bracket for a 69 chevelle
 

problem is that does not look like a 4 speed tunnel

Re: shifter bracket for a 69 chevelle
 

I agree, the opening should be more "Square" than you show. If this was a factory floor pan, I believe it was an automatic originally. IMHO. (for what that's worth)

Bill

Re: shifter bracket for a 69 chevelle
 

The car is a 4 speed car

Re: shifter bracket for a 69 chevelle
 

Is the drivers side of the tunnel bent down that is a 4 speed tunnel for a 4 speed console car

Re: shifter bracket for a 69 chevelle
 

It's a hump for a console

Re: shifter bracket for a 69 chevelle
 

The car is a 4 speed with a console