85 GMC Carb Project...
 

My Sunday morning project was to remove the QJ from our 85 GMC truck and send it to Dr. Eric for an overhaul. [long overdue]

Everything went smooth until I removed the kick-down cable connection...the plastic/rubber grommet fell apart. So while this won't impact the rebuild I will need to replace that little gizmo for the re-install.

Any ideas on where I can get one of these little parts...and can it be changed on the existing cable??

-wilma

https://www.yenko.net/ubbthreads/pics...8-img_0038.jpg
https://www.yenko.net/ubbthreads/pics...9-img_0039.jpg
https://www.yenko.net/ubbthreads/pics...0-img_0040.jpg
https://www.yenko.net/ubbthreads/pics...1-img_0041.jpg
https://www.yenko.net/ubbthreads/pics...2-img_0042.jpg
https://www.yenko.net/ubbthreads/pics...3-img_0043.jpg
https://www.yenko.net/ubbthreads/pics...4-img_0044.jpg
https://www.yenko.net/ubbthreads/pics...5-img_0045.jpg

Re: 85 GMC Carb Project...
 

If its a 700R4 I think you may need a new TV cable -- haven't seen any replacement clips ... TAZ [img]<<GRAEMLIN_URL>>/dunno.gif[/img]

Re: 85 GMC Carb Project...
 

http://www.rockauto.com/en/moreinfo....jsn=__GIX__3__

https://www.yenko.net/ubbthreads/pics..._cable_end.jpg

Re: 85 GMC Carb Project...
 

How cool is that..??? [img]<<GRAEMLIN_URL>>/smile.gif[/img]

Thanks Eric [img]<<GRAEMLIN_URL>>/worship.gif[/img]


-wilma

Re: 85 GMC Carb Project...
 

There goes that cat meowing again ... great! Eric has this up his sleeve!! TAZ

Re: 85 GMC Carb Project...
 

Most of the franchise parts stores stock these in the Dorman - HELP section. I stocked these 20 years ago and the original clips are getting more brittle every day.

Re: 85 GMC Carb Project...
 

Update 10/2/16...carb arrived from Eric...installed today. As you would expect it functioned perfectly right out of the box! A couple of pumps and she fired right up...runs good.

I found one of those kick-down gizmos...so, that part was replaced...kick-down working fine.

Now for an oil change and a fresh set of plugs and we will be ready for opening weekend at camp. I did notice a little noise underneath....looks like it's time for some exhaust work [img]<<GRAEMLIN_URL>>/rolleyes.gif[/img]

Thanks Eric for a great job and all your help [img]<<GRAEMLIN_URL>>/worship.gif[/img]

-wilma

Re: 85 GMC Carb Project...
 

Well, as the cold weather moved in, I noticed the truck was harder to start. A call to the doctor solved the problem...an adjustment to the choke pull-off and an increase in the fast idle speed did the trick. She is now safely stored for the winter...no sleeping bag Sammy [img]<<GRAEMLIN_URL>>/rolleyes.gif[/img]

Thanks Eric...

-wilma

Re: 85 GMC Carb Project...
 

[img]<<GRAEMLIN_URL>>/flag.gif[/img]