|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
1968 CAMARO KUSTOM HEADERS
HI, WOULD THESE HEADERS BE ACCEPTABLE FOR A 69 Z-28. I UNDERSTAND THAT THE DRIVER SIDE HEADER HAS AN ADAPTOR BRACKET FOR THE ALTERNATOR ON 68'S. DOES ANYONE HAVE SPECIFIC INFORMATION ABOUT THESE HEADERS? THANKS, JEFF
|
#2
|
||||
|
||||
Re: 1968 CAMARO KUSTOM HEADERS
They will fit and I bet they were still available over the counter at Chevrolet in 69... What do you mean by acceptable? If I am not mistaken Kustom made the 67-68 Camaro Dealer available Headers.
__________________
~JAG~ NCRS#65120 68 GTO HO 4 spd Alpine Blue /Parchment 2 owner car #21783 71 Corvette LT1 45k miles Orig paint - Brandshatch Green - National Top Flight - last known 71 LT1 built. 71 Corvette LT1 42k miles Original paint - Black - black leather - only black LT1 known to exist. NUMEROUS Lemans blue Camaros, Monza Red and Daytona Yellow Corvettes & a Chevelle or two... Survivors, restored cars, & other photos https://picasaweb.google.com/lh/myphotos |
#3
|
|||
|
|||
Re: 1968 CAMARO KUSTOM HEADERS
DID THESE HEADERS HAVE ANY MARKINGS OR STAMPINGS ON THE FLANGES? DID THEY ALL HAVE 4 BOLT COLLECTORS? THANKS, JEFF
|
#4
|
|||
|
|||
Re: 1968 CAMARO KUSTOM HEADERS
[ QUOTE ]
HI, WOULD THESE HEADERS BE ACCEPTABLE FOR A 69 Z-28. I UNDERSTAND THAT THE DRIVER SIDE HEADER HAS AN ADAPTOR BRACKET FOR THE ALTERNATOR ON 68'S. DOES ANYONE HAVE SPECIFIC INFORMATION ABOUT THESE HEADERS? THANKS, JEFF [/ QUOTE ] you may find this site helpful. http://taperfresto.com/1968_gm_facto...oduction_.html
__________________
Camaro, 'Cuda, Super Bee, Duster, Blazer and some trucks |
#5
|
|||
|
|||
Re: 1968 CAMARO KUSTOM HEADERS
[ QUOTE ]
DID THESE HEADERS HAVE ANY MARKINGS OR STAMPINGS ON THE FLANGES? DID THEY ALL HAVE 4 BOLT COLLECTORS? THANKS, JEFF [/ QUOTE ]Jeff, the Kustom headers optional from the General had four-bolt collector flanges, some were round and some were square, but all were four-bolt. If you have a set which you think might be originals, check with Jerry MacNeish or Wayne Quinn. |
#6
|
||||
|
||||
Re: 1968 CAMARO KUSTOM HEADERS
|
|
|