|
Register | Album Gallery | Thread Gallery | FAQ | Community | Calendar | Become a Paid Member | Today's Posts | Search |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Cleaning Comfort Weave seats...
Comfort weave seats are actual individual tied little knots and thus the seats are EXTREMELY porous, they will take in everything that is spilled on them, every bit of oil grime and grease on your clothes or skin... PLUS years of Armour All and whatever else lands on them...
Because the REAL comfort weave is not manufactured any longer, the ability to refurbish original seats becomes even more important for original cars. I had done a 69 SS Convertible with Dlx interior which came out beautifully so I knew the possibilities. First I used a foaming bathroom cleaner(KABOOM or Scrubbing Bubbles), Spray on then using an old toothbrush lightly brush in small circles, side ways and back and forth. Then using dilute 30 volume peroxide and a non foaming detergent pre-treat the comfort weave, NEXT extract everything with steam and commercial carpet vacuum until the extracted water runs clear... (it has an acrylic window so you can see what is being extracted.) The first set are of my 71 corvette seats, the second are some Neutral Comfort weave for the 73 RSLTZ I am restoring.
__________________
~JAG~ NCRS#65120 68 GTO HO 4 spd Alpine Blue /Parchment 2 owner car #21783 71 Corvette LT1 45k miles Orig paint - Brandshatch Green - National Top Flight - last known 71 LT1 built. 71 Corvette LT1 42k miles Original paint - Black - black leather - only black LT1 known to exist. NUMEROUS Lemans blue Camaros, Monza Red and Daytona Yellow Corvettes & a Chevelle or two... Survivors, restored cars, & other photos https://picasaweb.google.com/lh/myphotos Last edited by firstgenaddict; 09-21-2018 at 06:55 PM. |
#2
|
||||
|
||||
Nice work - patience and persistence really pays off.
__________________
Tim in NSW, Australia 1969 Van Nuys 04A Z/28 from Clippinger Chevrolet. Cortez Silver with dark blue interior. Ran at Lions Dragstrip and Pomona Raceway, with paint by Bob Kovacs of Fresno. |
#3
|
|||
|
|||
I have a set in my 69 that have some wear on them - there is a small tear along the bolster of the driver's seat where the piping connects. Any suggestions to keep the tear from progressing?
I also have an issue with the foam underlayment under the comfortweave breaking down. It doesn't have the "puff" to it anymore like it did when new. Would love to find an old-school upholstery guy who could restore the padding under the original fabric. This fabric is surprisingly tough. |
#4
|
||||
|
||||
Nice work an write up James!
|
#5
|
|||
|
|||
Great info James! I have been dreading getting anything on my seats because they look like they will hold on to everything that touches them.
These are my 73 Camaro Z28 seats that my upholster made from NOS comfortweave. The NOS material is very coarse to the touch. |
#6
|
|||
|
|||
Quote:
Nice write-up James. All good stuff and keep it coming.
__________________
70Z28 04B Norwood Forest Green-white Stripes Black DeLuxe Interior Owned since 1978 - First Car |
#7
|
|||
|
|||
It looks exactly like my my 46 year old seats, just has a very aggressive grip to it. I think a few times sitting and sliding on the seats will knock it down pretty quick.
|
#8
|
|||
|
|||
Thanks,
Who stitched yours up?
__________________
70Z28 04B Norwood Forest Green-white Stripes Black DeLuxe Interior Owned since 1978 - First Car |
#9
|
|||
|
|||
Stitch Craft in St George Utah.
|
|
|