Go Back   The Supercar Registry > General Discussion > Supercar/Musclecar Discussion


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 04-14-2007, 10:59 PM
Dog427435's Avatar
Dog427435 Dog427435 is offline
Senior Member
 
Join Date: Dec 2006
Location: Holbrook, NY
Posts: 3,368
Thanks: 7
Thanked 78 Times in 37 Posts
Default The 1963 Z-11 427 Impala

The R.P.O. Z-11 optioned Impala was designed for one reason and one reason only... Racing. Cubic inches were climbing fast in '63 and the Z-11 427 Impala was Chevrolet's way of keeping up with Ford, Pontiac, and Chrysler at the track.

The 427 was a modified 409 engine. The stroke was increased, special heads, valves and intake manifold were added. Fuel was supplied by 2-4bbl Carter AFB carburetors. A special cowl induction air cleaner was also used.
This car was all performance and no frills. You wouldn't find a radio or even a front sway bar. Most Z-11's were ordered with the heater delete option and no sound deadner. Light and fast was the idea with this car and to help lighten it, the Z-11 came with an aluminum front nose and other parts. Hood, fenders, front and rear bumper, front and rear bumper brackets and braces, grill brackets, a 2 piece riveted fan shroud, grill filler panel and hood support catch were all made from light weight aluminum making the car about 300 pounds lighter than a similar 409 powered production car.

To stop the car, sintered metallic brakes and special venting screens and air scoops in the backing plates for added cooling were used. All Z-11's came with T-10 4 speeds, a beefed up posi rear and a 4.11:1 gear ratio. (code JA)

Only 57 Z-11 optioned Impala's were produced and only 7 are thought to be in existance today, making them an extremely rare and valuable piece of Chevrolet history.

Although the Z-11 was made for racing, they weren't directly sold to race car drivers. Some ended up on car lots. And although 1963 was the only year for the Z-11, there were about 20 C.O.P.O. 1962 Impala's built mid to late in the year with aluminum front ends and equipped with 409's. These 409's had special features like the Z-11 intake manifold, special camshaft, heads, etc. There were also 18 extra sets of aluminum front ends made for that year and sold to race car drivers.

The base price of a 1963 Impala was $2774.00. Adding the price of the R.P.O. Z-11 option of $1240.00 to that brings the total price just over $4000.00 not including destination charges, taxes, etc.
Z-11 Facts and part numbers:
Produced only in 1963
The R.P.O. Z-11 option was an additional $1240.00
Shipping weight-3245 lbs.
Curb weight-3405 lbs.
57 Z-11 Impala's were produced
Only 7 are known to be in existance today
Modified 409 engine rated at 430hp@6000 RPM's. (Actual
horsepower was 480-525)
Block casting #3830814. Code "QM"
Block part number #3838253
Cylinder Heads #3837731 2.19 intake/1.72 exhaust
Valve Covers #3837739 (left), #3837740 (right)
Oil pan (deep sump) #3816322
2 piece Intake manifold #3830623 (top)-#3837733 (bottom)
Waterpump #3837691 (aluminum)
Cam #3837736 .556 intake/.556 exhaust lift with 325 duration
Crankshaft #3837472
Distributor #1111023
Coil #1115107
Generator #1100628
Starter #1107274
3.65" piston stroke
4.3125" bore (same as 409)
13.5:1 compression ratio
Special cowl induction air cleaner #6418986, #3839764 (duct)
Tach (redlined at 6200 rpm's)
Borg Warner T-10 4 speed transmission (close ratio)
Special posi rear with 4.11:1 rear gear ratio
Sintered metallic brake shoes
Screened rear brake backing plates with air scoops
15 X 5.5 wheels with 6.70 X 15 bias ply tires
Front coil springs #3824693
Rear coil springs #3824694
Deleted front sway bar
Optional sound proofing and insulation delete on most
Optional heater delete on most
Hood #3837710 (aluminum)
Hood catch #3837718 (aluminum)
Grill filler panel #3837750 (aluminum)
Left fender #3837765 (aluminum)
Right fender #3837766 (aluminum)
Front bumper center #3837751 (aluminum)
Front bumper LH #3837755 (aluminum)
Front bumper RH #3837756 (aluminum)
Rear bumper center #3837752 (aluminum)
Rear bumper LH #3837753 (aluminum)
Rear bumper RH #3837754 (aluminum)
Front bumper bracket LH #3837763 (aluminum)
Front bumper bracket RH #3837764 (aluminum)
Rear bumper bracket LH #3837757 (aluminum)
Rear bumper bracket RH #3837758 (aluminum)
Rear frame to bumper brace LH #3837759 (aluminum)
Rear frame to bumper brace RH #3837760 (aluminum)
Thanks to http://www.348-409.com/ for all the above info

-
[b]Finding one of these 7 beauties is tough - but going to a show and seeing 2 side by side is amazing!!
One completely stock and the other in race trim!!

-
-

-

-


-

-


-

__________________
Reply With Quote
Click here to view all the pictures posted in this thread...
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 04:46 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.

O Garage vBulletin Plugins by Drive Thru Online, Inc.